Start with the Output
Receipt printers and label printers both use thermal technology, but they solve different jobs. If the output is a tear-off customer receipt, start with receipt models. If the output is adhesive shipping, shelf, or compliance labels, start with label models.
Decision Criteria
| Criterion | Receipt path | Label path |
|---|---|---|
| Media | Continuous thermal roll | Die-cut or continuous label stock |
| Typical width | 58 mm / 80 mm | Application-specific widths |
| Cutter | Auto or manual tear | Often peeler / cutter options |
| Placement | Under counter, kitchen, service desk | Packing station, backroom, line side |
Shared IT Concerns
Regardless of path, standardize:
- Host interfaces (USB, Ethernet, serial as required)
- Driver and firmware versions archived at image freeze
- Media SKUs documented for replenishment
Browse receipt printers and POS printers, then open model download pages from the Drivers Center.
Next Step
When volumes and media sizes are known, request quotation with site count and preferred interfaces.